Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5367-09
Holden 2005 - 06 CV8Z Monaro Duel Outlet Try-Y Headers 2 1/2 Inch System
Holden 2005 - 06 CV8Z Monaro Duel Outlet Try-Y Headers 2 1/2 Inch System.
BrandPacemaker
Category: Extractors and headers
RRP $4406.44 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5367-09
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VZ
- Stock status
- Confirmed on order
The Pacemaker PP5367-09 is a Tri-Y header set with a dual-outlet 2-1/2 inch system, listed to fit the 2005-06 Holden CV8Z Monaro. It's a header-and-pipework package, not a tailpipe-only swap.
What's in this header system?
This is a Tri-Y extractor design paired with a dual-outlet 2-1/2 inch system, listed for the CV8Z Monaro from 2005-06. Tri-Y refers to how the primary pipes pair off before merging — a layout chosen to keep mid-range pulses tidy on a V8 like the Monaro's. The dual-outlet rear means the system splits to two exits rather than one. No flow, power or sound figures are published by the supplier, and we won't quote any.
What are headers and what do they change?
Headers (extractors) replace the cast factory exhaust manifolds with tuned tubular primaries. The idea is to give each cylinder a cleaner path out, which is why enthusiasts fit them as the front end of a performance exhaust. They sit right at the engine, so fitment tolerances and clearances around the bellhousing and steering matter. What a set like this actually delivers on your car depends on the rest of the system and the tune — we don't publish numbers for it.
Will it suit my Holden Monaro?
It's listed to fit the Holden CV8Z Monaro from 2005, and the dual-outlet 2-1/2 inch layout is specific to that build. Header fitment is tight by nature, so confirm your exact variant and any prior modifications with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Tri-Y header systems like this in the Illawarra. We check primary and collector clearance, fit fresh gaskets, and confirm the dual-outlet system lines up with your Monaro before sealing it for heat. RRP is listed at 4406 AUD; fitting is quoted once we've seen the car.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the PP5367-09 fit a 2005 Monaro?
- It's listed to fit the 2005-06 Holden CV8Z Monaro. Confirm your exact build and any earlier exhaust work with the workshop before ordering.
- Is this just the headers or a full system?
- It's the Tri-Y headers together with a dual-outlet 2-1/2 inch system, so it covers the front extractors plus the pipework, not the tailpipe alone.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.