Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5367-19
Holden VU and VY Series 1 8 Cylinder Ute Try-Y Headers 2 1/2 Inch System
Holden VU and VY Series 1 8 Cylinder Ute Try-Y Headers 2 1/2 Inch System.
BrandPacemaker
Category: Extractors and headers
RRP $4123.21 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5367-19
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VU VX VY
- Stock status
- Confirmed on order
The Pacemaker PP5367-19 is a Tri-Y header set with a 2-1/2 inch system, listed to fit the Holden VU and VY Series 1 V8 ute. It's the headers plus pipework for the one-tonner Commodore-based ute.
What does this ute system cover?
This pairs Tri-Y extractors with a 2-1/2 inch system, listed for the Holden VU and VY Series 1 V8 ute. Tri-Y describes how the primaries pair before merging into the collector. The ute application means the system is routed for the longer-bodied VU/VY platform rather than the sedan. No power or sound figures are published by the supplier, and we won't quote any.
What are headers and what do they change?
Headers replace the cast factory manifolds with tubular primaries that give each cylinder a tuned path out. They're the front end of a performance exhaust, so they're fitted with the system that runs behind them. On a V8 ute like the VU/VY, the routing has to suit the ute floor and rear, which is why a ute-specific listing exists. What it delivers depends on the whole system and tune — we publish no numbers.
Will it suit my Holden VU or VY ute?
It's listed to fit the Holden VU and VY Series 1 V8 ute. Series-1 specifically matters here, so confirm your exact model year and any earlier exhaust work with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Holden ute header systems like this in the Illawarra. We check extractor clearance, fit fresh gaskets, and route the 2-1/2 inch system to suit the VU/VY ute body before sealing the joins. RRP is listed at 4123 AUD; fitting is quoted once we've seen the ute.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the PP5367-19 fit a VY Series 2?
- It's listed for the VU and VY Series 1 V8 ute. Series 2 isn't named on this listing, so confirm your exact model with the workshop before ordering.
- Is this headers only or a system?
- It's the Tri-Y headers with a 2-1/2 inch system, so it covers the extractors plus the pipework.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.