Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5367-20
Holden VU and VY Series 1 8 Cylinder Ute Try-Y Headers 2 1/2 Inch System With Rear Pipe
Holden VU and VY Series 1 8 Cylinder Ute Try-Y Headers 2 1/2 Inch System With Rear Pipe Only.
BrandPacemaker
Category: Extractors and headers
RRP $3799.94 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5367-20
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VU VX VY
- Stock status
- Confirmed on order
The Pacemaker PP5367-20 is a Tri-Y header set with a 2-1/2 inch system supplied as rear pipe only, listed to fit the Holden VU and VY Series 1 V8 ute. It's the headers and pipework without a rear muffler.
What does this rear-pipe-only ute system cover?
This pairs Tri-Y extractors with a 2-1/2 inch system in the rear-pipe-only form — the pipework runs through to the back without a rear muffler in the kit. Listed for the Holden VU and VY Series 1 V8 ute, it suits owners who've already chosen their own rear silencing. Tri-Y describes how the primaries pair before merging. No sound figures are published, and we won't put numbers to it.
What are headers and why fit them?
Headers swap the cast manifolds for tubular primaries, giving each cylinder a tuned path out — the front end of a performance exhaust. Because this is the rear-pipe-only version, the muffler choice is deliberately left open, so the on-road note depends entirely on what you run at the back. For a V8 ute that's a meaningful decision worth settling before fitting.
Will it suit my Holden VU or VY ute?
It's listed to fit the Holden VU and VY Series 1 V8 ute. The rear-pipe-only layout suits owners running their own rear muffler, so confirm your exact model and what you're fitting at the back with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Holden ute header systems like this in the Illawarra. With a rear-pipe-only kit we'll talk through the rear silencing, check extractor clearance, and seal the joins for heat. RRP is listed at 3800 AUD; fitting and any rear muffler are quoted once we've seen the ute.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Why is the PP5367-20 'rear pipe only'?
- It supplies the Tri-Y headers and 2-1/2 inch pipework to the back without a rear muffler. You choose the rear silencing separately, which we can fit at the workshop.
- Does it fit my VU ute?
- It's listed for the Holden VU and VY Series 1 V8 ute. Confirm your exact model and existing exhaust with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.