Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5367-23
Holden VY Series 2 - VZ 5.7 8 Cylinder Ute Try-Y Headers 2 1/2 Inch System
Holden VY Series 2 - VZ 5.7 8 Cylinder Ute Try-Y Headers 2 1/2 Inch System.
BrandPacemaker
Category: Extractors and headers
RRP $4222.34 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5367-23
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VY VZ
- Stock status
- Confirmed on order
The Pacemaker PP5367-23 is a Tri-Y header set with a 2-1/2 inch system, listed to fit the Holden VY Series 2 and VZ 5.7L V8 ute. It's the headers plus pipework, not the rear-pipe-only variant.
What does this system cover?
This pairs Tri-Y extractors with a 2-1/2 inch system, listed for the Holden VY Series 2 and VZ 5.7L V8 ute. Tri-Y describes how the primaries pair before merging into the collector. Unlike the rear-pipe-only version in the same family, this is the fuller 2-1/2 inch system. No power or sound figures are published by the supplier, and we won't quote any.
What are headers and what do they change?
Headers swap the cast factory manifolds for tubular primaries that give each cylinder a tuned path out. They're the front end of a performance exhaust, fitted with the pipework behind them. On a 5.7L V8 ute the routing has to suit the longer ute body, which is why a ute-specific listing exists. What it delivers depends on the whole system and the tune — no numbers are published.
Will it suit my Holden VY Series 2 or VZ ute?
It's listed to fit the Holden VY Series 2 and VZ 5.7L V8 ute. The Series-2/VZ distinction matters, so confirm your exact model and engine with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Holden ute header systems like this in the Illawarra. We check extractor clearance, fit fresh gaskets, and route the 2-1/2 inch system to suit the ute before sealing the joins. RRP is listed at 4222 AUD; fitting is quoted once we've seen the ute.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- How does the PP5367-23 differ from the rear-pipe-only version?
- This is the fuller 2-1/2 inch Tri-Y system for the VY Series 2/VZ 5.7L ute, where the -21 in the same family is rear pipe only. We'll help you choose at the workshop.
- Does it fit a VY Series 1?
- No — this listing is for the VY Series 2 and VZ 5.7L V8 ute. Confirm your model with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.