Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5367-32
Holden VT VX VY Series 1 8 Cylinder Wagon Try-Y Headers 2 1/2 Inch System With Rear Pipe
Holden VT VX VY Series 1 8 Cylinder Wagon Try-Y Headers 2 1/2 Inch System With Rear Pipe Only.
BrandPacemaker
Category: Extractors and headers
RRP $3799.94 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5367-32
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VT VX VY
- Stock status
- Confirmed on order
The rear-pipe-only build is what marks out the Pacemaker PP5367-32: a Tri-Y header system for the Holden VT, VX and VY Series 1 eight-cylinder wagon, supplied through to the rear pipe with no muffler section.
What does rear-pipe-only mean on the wagon?
The PP5367-32 covers the Tri-Y header and pipework through to the rear pipe, leaving the muffler section out. On a wagon, where the body runs long to the tailgate, that means the system is routed to the rear with the muffler arranged separately to taste or from stock on hand.
What's a Tri-Y header?
A Tri-Y pairs the runners and merges them in two stages rather than a single collector, known for a fuller torque spread through the mid-range that suits a heavier wagon. The PP5367-32 replaces the factory cast manifold with that layout across the VT, VX and VY Series 1 eight-cylinder wagon.
Will it fit my VT, VX or VY Series 1 wagon?
It's listed to fit the Holden VT, VX and VY Series 1 eight-cylinder wagon. Because it's the rear-pipe-only build, confirm your exact wagon, series and how the muffler is handled with the workshop before ordering.
Fitting at our Illawarra workshop
Oak Flats Muffler Men fits Pacemaker Tri-Y systems in-house across the Illawarra. We fit gaskets, run the header and pipework to the rear along the long wagon body, check the clearances, and arrange the muffler since this build comes without one. The listing spans the VT, VX and VY Series 1, so we confirm which one you've got first. As a Pacemaker special-order item it's brought in rather than stocked at $3,799.94 AUD, confirmed before ordering.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the PP5367-32 include a muffler?
- No, it's the rear-pipe-only Tri-Y build for the VT/VX/VY Series 1 wagon, supplied without the muffler section.
- What body is it for?
- The Holden VT, VX and VY Series 1 eight-cylinder wagon. Confirm your exact build with the workshop first.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.