Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5367-34
Holden VZ 6.0L 8 Cylinder Wagon Try-Y Headers 2 1/2 Inch System With Rear Pipe Only
Holden VZ 6.0L 8 Cylinder Wagon Try-Y Headers 2 1/2 Inch System With Rear Pipe Only.
BrandPacemaker
Category: Extractors and headers
RRP $3998.19 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5367-34
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VZ
- Stock status
- Confirmed on order
Listed for the Holden VZ 6.0L eight-cylinder wagon, the Pacemaker PP5367-34 is a Tri-Y header system supplied rear-pipe-only, header and pipework to the rear pipe, no muffler.
What the 6.0L VZ wagon gets in rear-pipe-only form
The PP5367-34 is the 6.0L VZ wagon listing without the muffler section: the Tri-Y header and pipework run through to the rear pipe, and the muffler is sorted separately. On a wagon the body runs long to the tailgate, so the rear routing is shaped to that shell rather than a sedan or ute.
What the Tri-Y merge does
Pairing the runners and merging them in two stages, a Tri-Y builds a fuller torque character through the mid-range compared with a single-collector 4-into-1, the usable end for a heavier 6.0L wagon. The PP5367-34 fits that layout in place of the cast manifold.
Fitment to your VZ 6.0L wagon
It's listed to fit the Holden VZ 6.0L eight-cylinder wagon. Tri-Y fitment is tight to body and driveline, so confirm your exact VZ wagon, that it's the 6.0L, and how the muffler is handled before ordering this rear-pipe-only build.
Fitting at our Illawarra workshop
Oak Flats Muffler Men fits Pacemaker Tri-Y systems in-house across the Illawarra. We fit gaskets, run the header and pipework back along the long wagon body, check the clearances and how it meets the cat, and arrange the muffler since this build comes without one. As a Pacemaker special-order item it's brought in rather than held in stock, so we confirm your exact 6.0L VZ wagon before it's sourced. Recommended retail is $3,998.19 AUD, confirmed before ordering.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is a muffler supplied with the PP5367-34?
- No, it's the rear-pipe-only Tri-Y build for the Holden VZ 6.0L wagon, supplied without the muffler section.
- What does it fit?
- The Holden VZ 6.0L eight-cylinder wagon. Confirm your exact build with the workshop first.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.