Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5367-36
Holden VZ 6.0L 8 Cylinder Wagon Try-Y Headers 2 1/2 Inch System
Holden VZ 6.0L 8 Cylinder Wagon Try-Y Headers 2 1/2 Inch System. Fast shipping.
BrandPacemaker
Category: Extractors and headers
RRP $4321.46 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5367-36
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VZ
- Stock status
- Confirmed on order
The Pacemaker PP5367-36 brings the Tri-Y header layout to the Holden VZ 6.0L eight-cylinder wagon as the header and front section, staged paired runners shaped to the long wagon body.
What the Tri-Y merge suits on the VZ wagon
A Tri-Y pairs the runners and merges them in two stages rather than dumping four into one collector, building a broader torque spread low and through the mid-range. That's the part of the rev range a weighty 6.0L wagon lives in, and the PP5367-36 puts that layout in place of the factory cast manifold.
Header and front section, what's covered
This is the header and front section for the 6.0L VZ wagon, replacing the manifolds and tying into the cat and rear sections behind it. The wagon's long body sets the front routing, so the pipework is shaped to clear that floorpan.
Fitment to your VZ 6.0L wagon
It's listed to fit the Holden VZ 6.0L eight-cylinder wagon. Tri-Y fitment is sensitive to body and driveline, so confirm your exact VZ wagon and that it's the 6.0L with the workshop before ordering.
Fitting at our Illawarra workshop
Oak Flats Muffler Men fits Pacemaker Tri-Y systems in-house across the Illawarra. On the wagon we check clearances and routing along the long body, fit fresh gaskets and tie the header into the cat and rear sections that carry on behind it. As a Pacemaker special-order item it's brought in rather than held on the shelf, so we confirm your exact 6.0L VZ wagon before the part is sourced. Recommended retail is $4,321.46 AUD, confirmed before ordering.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Which engine does the PP5367-36 suit?
- The Holden VZ 6.0L eight-cylinder wagon. Confirm your exact build with the workshop first.
- Is this a complete exhaust?
- No, it's the Tri-Y header and front section. The cat and rear sections behind it are separate.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.