Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5367-57
Holden 2001 - 2005 CV8 Monaro Single Outlet Try-Y Headers 3" Inch System
Holden 2001 - 2005 CV8 Monaro Single Outlet Try-Y Headers 3" Inch System (SKU: PP5367-57), $4301.19 from Pacemaker.
BrandPacemaker
Category: Extractors and headers
RRP $4301.19 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5367-57
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden V2
- Stock status
- Confirmed on order
The Pacemaker PP5367-57 is a 3in Try-Y header system listed to fit the Holden Monaro CV8 built 2001–2005, in single-outlet form. It's a full extractor-and-pipework package rather than a tip swap, priced at $4,301.19 AUD.
What does this system cover?
This PP5367-57 runs Pacemaker's Try-Y header design into a 3in system sized for the V8 Monaro. A Try-Y header gathers the primaries into a stepped collector arrangement before the pipe rather than dumping straight into a single merge, which is the part of the exhaust closest to the heads and the section most builders change first. It's set up here as a single-outlet layout, so the rear of the system feeds one exit path.
What is a Try-Y header and why fit one?
Headers (extractors) replace the cast factory manifolds with tubular runners. A Try-Y is a specific collector geometry that pairs cylinders into Y-junctions to manage exhaust pulses on a V8. The trade-off is honest: headers and a larger 3in system change how the engine breathes and how it sounds compared with stock, and they shift where emissions hardware sits, so they're a considered upgrade, not a bolt-on accessory. We don't publish power or sound figures for this part — Pacemaker doesn't supply them and we won't invent them.
Will it suit my CV8 Monaro?
It's listed to fit the 2001–2005 Holden Monaro CV8 in single-outlet configuration. Listings can be imperfect, so confirm your exact build — engine, gearbox and any prior modifications — with the workshop before ordering. A header set this size is a special-order item at this price point, so we check fitment first.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits Pacemaker header systems in-house across the Illawarra. For a 3in Try-Y package we check clearances, the collector-to-pipe joins and any compliance requirements for your registration before booking the bay. Road compliance for header changes is something we confirm with you up front rather than assume.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the PP5367-57 fit my Holden Monaro CV8?
- It's listed to fit the 2001–2005 Holden Monaro CV8 in single-outlet form. Confirm your exact build with the workshop before ordering.
- Is this a complete header system or just the extractors?
- It's the 3in Try-Y header system — the extractors and matched pipework — not a tailpipe-only change.
- Is it road legal?
- Compliance for header changes depends on your vehicle and registration. We confirm what's required with you before fitting rather than make a blanket claim.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.