Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5367-69
Holden VY Series 2 - VZ 5.7 8 Cylinder Ute Try-Y Headers 3" Inch System With Rear Pipe
Holden VY Series 2 - VZ 5.7 8 Cylinder Ute Try-Y Headers 3" Inch System With Rear Pipe Only.
BrandPacemaker
Category: Extractors and headers
RRP $4041.85 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5367-69
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VY VZ
- Stock status
- Confirmed on order
The Pacemaker PP5367-69 is a 3in Try-Y header system listed to fit the Holden VY Series 2 and VZ 5.7 V8 ute, supplied in rear-pipe-only form. It's a full extractor-and-pipework package, priced at $4,041.85 AUD.
What does this system cover?
The PP5367-69 runs Pacemaker's Try-Y header design into a 3in system sized for the V8 ute. It's listed as the rear-pipe-only version, meaning the package is set up without a muffler in that section — a more open layout than a mufflered build. It's the extractor-forward part of the exhaust, the section closest to the heads and the first part most V8 builders change, finished through to the rear pipe.
What is a Try-Y header and what does it change?
Headers (extractors) replace the cast factory manifolds with tubular runners. A Try-Y is a specific collector geometry that pairs cylinders into Y-junctions to manage exhaust pulses on a V8. The honest trade-off is that a 3in Try-Y system changes how the engine breathes and how it sounds compared with stock, and the rear-pipe-only layout here is more open again. We don't publish power or sound figures — Pacemaker doesn't supply them and we won't invent them.
Will it suit my VY or VZ ute?
It's listed to fit the Holden VY Series 2 and VZ 5.7 8-cylinder ute. Listings can be imperfect, so confirm your exact build — engine, gearbox and any prior modifications — with the workshop before ordering. A header package at this price is a special-order item, so we check fitment before it goes on the bench.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits Pacemaker header systems in-house across the Illawarra. For a 3in rear-pipe-only Try-Y build we check clearances, the collector-to-pipe joins and the rear routing on the ute body before booking the bay. Road compliance for header changes depends on your vehicle and registration, so we confirm what's required with you up front.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does rear-pipe-only mean on the PP5367-69?
- It's the Try-Y header system supplied without a muffler in the rear section — a more open layout than the mufflered version of this part.
- Will it fit my VY Series 2 or VZ ute?
- It's listed to fit the Holden VY Series 2 and VZ 5.7 V8 ute. Confirm your exact build with the workshop before ordering.
- Is it road legal?
- Compliance for header changes depends on your vehicle and registration. We confirm what's required with you before fitting rather than make a blanket claim.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.