Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5367-70
Holden VZ 6.0L 8 Cylinder Ute Try-Y Headers 3" Inch System With Rear Pipe Only
Holden VZ 6.0L 8 Cylinder Ute Try-Y Headers 3" Inch System With Rear Pipe Only.
BrandPacemaker
Category: Extractors and headers
RRP $4140.97 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5367-70
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VZ
- Stock status
- Confirmed on order
Laid out as a tri-Y header system, the Pacemaker PP5367-70 is a 3in package listed to fit the Holden 6.0L V8 ute. The tri-Y merge — paired runners joining in two stages — sets it apart from a 4-into-1, and it runs a 3in system through to a rear pipe.
Tri-Y versus 4-into-1 — what's the difference?
A tri-Y header pairs its runners and merges them in two stages rather than bringing all four into a single collector at once. That staged merge tends to give a broad, even torque character across the rev range. On the Holden 6.0L V8 ute the PP5367-70 uses this tri-Y layout feeding a 3in system. We publish no power, flow or sound figures and won't quote any.
What's in the 3in system?
The PP5367-70 is a 3in package: the tri-Y headers plus the pipework through to a rear pipe. The listing notes it's supplied without a muffler, with the rear pipe only — so the muffler is configured separately. The 3in figure is the system diameter as listed for this part.
Will it suit my Holden ute?
It's listed to fit the Holden 6.0L V8 ute. Body style and engine both decide fit, and a 3in tri-Y system needs the routing checked under a ute floor, so we confirm the PP5367-70 against your exact vehicle before ordering. Send us the build and we'll check clearances.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Pacemaker tri-Y systems across the Illawarra. We check the tri-Y runner and collector clearance, route the 3in pipework and rear pipe under the ute, fit fresh gaskets and seal the joints. Because it's supplied without a muffler, we'll confirm the muffler plan with you. RRP is listed at 4140.97 AUD; fitting is quoted once we've seen the vehicle.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What makes this a tri-Y system?
- The headers pair their runners and merge in two stages rather than 4-into-1, which tends to broaden the torque character. It feeds a 3in system on the Holden 6.0L V8 ute.
- Does it come with a muffler?
- No — the PP5367-70 is listed as supplied without a muffler, with the rear pipe only. We'll confirm the muffler plan with you at the workshop.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.