Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5367-79
Holden VT VX VY Series 1 8 Cylinder Wagon Try-Y Headers 3" Inch System
Holden VT VX VY Series 1 8 Cylinder Wagon Try-Y Headers 3" Inch System. Fast.
BrandPacemaker
Category: Extractors and headers
RRP $4265.74 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5367-79
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VT VX VY
- Stock status
- Confirmed on order
The Pacemaker PP5367-79 is a 3in Tri-Y header system listed to fit the Holden VT, VX and VY Series 1 V8 wagon. It replaces the factory manifolds with tuned-length extractors carried through a 3in pipe run, so it's the front-of-system upgrade rather than a tailpipe change.
What does the PP5367-79 cover?
This is an extractor (header) system for the Holden VT, VX and VY Series 1 V8 wagon. It swaps the cast factory exhaust manifolds for tuned-length headers and runs that into a 3in pipe — the part of the exhaust nearest the engine, where flow is established. It's listed across the VT through VY Series 1 wagon V8s, which share enough of their layout for one kit to cover them.
What's a Tri-Y header and what does it change?
Tri-Y refers to the way the primary pipes pair into two intermediate collectors before merging into one. Builders favour Tri-Y for a more even spread of response across the rev range rather than a single sharp peak. Compared with the factory manifold it's freer-flowing, but also louder and hotter in the engine bay, so it's a considered change rather than a quiet one. How it behaves depends on the rest of the system and any tuning.
Will it suit my Holden wagon?
It's listed to fit the Holden VT, VX and VY Series 1 V8 wagon. Across that run there were variations in driveline and underbody, so confirm your exact model and the rest of your exhaust with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits header systems like this in-house across the Illawarra. At $4,265.74 it's a full front-of-system job, so send your wagon's details and we'll check clearances, how the headers meet what's behind them, and book it in.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Which Holdens does the PP5367-79 fit?
- It's listed for the VT, VX and VY Series 1 V8 wagon. Confirm your exact model with the workshop first.
- Does this include the rear of the exhaust?
- It's a 3in Tri-Y header system — the extractors and front pipework. We can confirm how it pairs with the rest of your exhaust.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.