Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5367-80
Holden VT VX VY Series 1 8 Cylinder Wagon Try-Y Headers 3" Inch System With Rear Pipe
Holden VT VX VY Series 1 8 Cylinder Wagon Try-Y Headers 3" Inch System With Rear Pipe Only.
BrandPacemaker
Category: Extractors and headers
RRP $3942.72 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5367-80
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VT VX VY
- Stock status
- Confirmed on order
The Pacemaker PP5367-80 is a 3in Tri-Y header system with rear pipe only — no muffler — listed to fit the Holden VT, VX and VY Series 1 V8 wagon. It runs tuned-length extractors and a 3in pipe straight through to the back.
What does the PP5367-80 cover?
This is an extractor (header) system for the Holden VT, VX and VY Series 1 V8 wagon, configured with a rear pipe and no muffler. It replaces the factory manifolds with tuned-length headers and carries 3in pipe through to the tail. Leaving the muffler out means the system is the straight-through version of this Tri-Y kit rather than the mufflered one.
What's a Tri-Y header and what does it change?
Tri-Y describes how the primary pipes pair into two collectors before merging — a layout builders pick for a broader spread of response rather than one narrow peak. Replacing the cast manifold with this tubing frees the exhaust path but also lifts noise and under-bonnet heat. With no muffler in this configuration, expect it to be louder than a mufflered set-up; how loud and how it suits your wagon depends on the rest of the system and how it's used.
Will it suit my Holden wagon?
It's listed to fit the Holden VT, VX and VY Series 1 V8 wagon. Because this is the no-muffler, rear-pipe-only build, the resulting sound and any local requirements are worth discussing with the workshop, along with confirming your exact model, before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits header systems like this across the Illawarra. At $3,942.72 this is a full front-to-rear job; tell us your wagon's details and we'll confirm clearances, the muffler-delete configuration and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the PP5367-80 come with a muffler?
- No — this configuration is rear pipe only, with no muffler, so it's the straight-through version of the Tri-Y system.
- Which Holdens does it fit?
- It's listed for the VT, VX and VY Series 1 V8 wagon. Confirm your exact model with the workshop first.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.