Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5367-81
Holden VY Series 2 - VZ 5.7 8 Cylinder Wagon Try-Y Headers 3" Inch System With Rear Pipe
Pacemaker Holden VY Series 2 - VZ 5.7 8 Cylinder Wagon Try-Y Headers 3" Inch System With Rear Pipe Only.
BrandPacemaker
Category: Extractors and headers
RRP $4041.85 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5367-81
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VY VZ
- Stock status
- Confirmed on order
The Pacemaker PP5367-81 is a 3in Tri-Y header system with rear pipe only — no muffler — listed to fit the Holden VY Series 2 and VZ 5.7 V8 wagon. It runs tuned-length extractors and 3in pipe through to the tail.
What does the PP5367-81 cover?
This is an extractor (header) system for the Holden VY Series 2 and VZ 5.7 V8 wagon, set up with a rear pipe and no muffler. It swaps the factory manifolds for tuned-length headers and carries 3in pipe to the back. Omitting the muffler makes this the straight-through version of the Tri-Y kit for these wagons.
What's a Tri-Y header and what does it change?
Tri-Y is the header layout where the primaries pair into two collectors before merging into one, chosen for a more even spread of response across the rev range. Going from the cast manifold to this tubing frees the exhaust path but raises noise and engine-bay heat. With no muffler in this build it will be louder than a mufflered version; how that sits in your wagon depends on the rest of the system and how it's driven.
Will it suit my Holden wagon?
It's listed to fit the Holden VY Series 2 and VZ 5.7 V8 wagon. Since this is the no-muffler configuration, it's worth talking through the resulting sound and any local requirements with the workshop, and confirming your exact model and engine, before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits header systems like this across the Illawarra. At $4,041.85 it's a full front-to-rear install, so send your wagon's details and we'll confirm clearances, the muffler-delete layout and book it in.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the PP5367-81 mufflered?
- No — this configuration is rear pipe only with no muffler, the straight-through version of the Tri-Y system.
- What does it fit?
- It's listed for the Holden VY Series 2 and VZ 5.7 V8 wagon. Confirm your exact build with the workshop.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.