Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5381-09
HSV VF GEN-F Maloo May 2013 - Sep 2015 LS3 V8 (Factory Fixed Exhaust Tips) 1 3/4" 4 Into
HSV VF GEN-F Maloo May 2013 - Sep 2015 LS3 V8 (Factory Fixed Exhaust Tips) 1 3/4" 4 Into 1 Headers 2 1/2" Ute Cat Back System.
BrandPacemaker
Category: Extractors and headers
RRP $2439.06 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5381-09
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VF
- Stock status
- Confirmed on order
The Pacemaker PP5381-09 is a header-and-cat-back package listed to fit the HSV VF Gen-F Maloo (2013, LS3 V8 ute, factory-fixed exhaust tips). It pairs 1 3/4in 4-into-1 headers with a 2 1/2in ute cat-back system, listed at $2,439.06.
What does the PP5381-09 cover?
This package combines 1 3/4in 4-into-1 extractors with a 2 1/2in cat-back system for the HSV VF Gen-F Maloo ute. The headers take over from the factory manifolds at the head; the cat-back replaces the exhaust from the catalytic converter rearward, finishing at the Maloo's factory-fixed exhaust tips. Together they cover the front and rear of the system as one matched build.
What's a 4-into-1 header and a cat-back, and what do they change?
A 4-into-1 header merges all four primary pipes on a bank into a single collector — a layout often chosen for top-end flow. A cat-back is the section from the catalytic converter back, so it changes the rear half of the exhaust without touching the emissions hardware ahead of the cat. The 1 3/4in primaries and 2 1/2in cat-back are the sizing for this set. Both steps make the system freer-flowing and louder than stock; the actual result depends on tuning.
Will it suit my HSV Maloo?
It's listed to fit the HSV VF Gen-F Maloo built May 2013 to September 2015 with the LS3 V8 and factory-fixed exhaust tips. That tip arrangement matters because the cat-back is built to suit it, so confirm your exact Maloo and its tip set-up with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits header-and-cat-back packages like this across the Illawarra. We'll confirm it suits your Gen-F Maloo, check clearances front to back, and book the install once your ute is verified.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the PP5381-09 fit?
- It's listed for the HSV VF Gen-F Maloo (May 2013-Sep 2015) with the LS3 V8 and factory-fixed exhaust tips. Confirm your exact ute with the workshop.
- Is this just the cat-back?
- No — it's a package: 1 3/4in 4-into-1 headers plus a 2 1/2in cat-back system. We can confirm exactly what suits your Maloo.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.