Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5381-16
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 2 1/2" System
BrandPacemaker
Category: Extractors and headers
RRP $4619.08 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5381-16
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden WM
- Stock status
- Confirmed on order
The Pacemaker PP5381-16 is a header system listed to fit the Holden Statesman WM-WN Series I and II (2006, 6.0/6.2 V8). It runs 1 3/4in 4-into-1 headers into a 2 1/2in system, listed at $4,619.08.
What does the PP5381-16 cover?
This is an extractor-and-pipework system for the Holden Statesman WM-WN, Series I and II, with the 6.0 or 6.2 V8. It pairs 1 3/4in 4-into-1 headers with a 2 1/2in pipe run, so it covers the exhaust at the head and the matched pipework behind it as one build for the long-wheelbase Statesman.
What's a 4-into-1 header and what does it change?
A 4-into-1 header merges all four primary pipes on a bank into a single collector, a layout often chosen to favour top-end flow. It replaces the restrictive cast manifold with smoother tubing, while the 2 1/2in system carries that through to the rear. The 1 3/4in primaries are the sizing for this set. The change makes the system freer-flowing and louder than stock, with the real outcome set by the rest of the build and tuning.
Will it suit my WM-WN Statesman?
It's listed to fit the Holden Statesman WM-WN, both Series I and Series II, from August 2006 with the 6.0/6.2 V8. The Statesman is the long-wheelbase car, so this system is built to suit it specifically — confirm your exact model and engine with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits header systems like this across the Illawarra. At $4,619.08 it's a full front-to-rear install, so send your Statesman's details and we'll confirm clearances, how the headers meet the pipework and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the PP5381-16 fit?
- It's listed for the Holden Statesman WM-WN Series I and II from 2006 with the 6.0/6.2 V8. Confirm your exact car with the workshop.
- Does it cover both Series I and II?
- Yes — it's listed for both Series I and Series II WM-WN Statesman. We can confirm it suits your specific car.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.