Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5381-17
Holden VE - VF Ute Aug 2007 - Oct 2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 2
Holden VE - VF Ute Aug 2007 - Oct 2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 2 1/2" Ute System (SKU: PP5381-17), $4720.97
BrandPacemaker
Category: Extractors and headers
RRP $4720.97 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5381-17
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VF
- Stock status
- Confirmed on order
The Pacemaker PP5381-17 is a 1 3/4 4-into-1 header set with a 2 1/2 ute system listed to fit the Holden VE-VF ute (Aug 2007 to Oct 2017) with the 6.0 Gen IV or 6.2 LS3 V8. Supplied by Pacemaker, listed at $4,720.97.
What is the PP5381-17?
This is a 1 3/4 4-into-1 header set paired with a 2 1/2 ute system, listed for the Holden VE-VF ute fitted with the 6.0 Gen IV or 6.2 LS3 V8, from August 2007 to October 2017. A 4-into-1 header collects all four runners on each bank into a single collector. It combines the extractor side with the system behind it, so it covers more of the exhaust than headers alone.
What's a 4-into-1 header and what does it change?
A 4-into-1 header merges all four exhaust runners on a bank into one collector rather than pairing them in stages. The 1 3/4 primaries and 2 1/2 system behind them are part of how this set is matched. Replacing the cast manifolds reduces back-pressure and changes the exhaust note compared with stock. The trade-offs are more under-bonnet heat and a louder, different sound, and the result depends on the whole system staying matched.
Will it suit my Commodore ute?
It's listed to fit the Holden VE-VF ute with the 6.0 Gen IV or 6.2 LS3 V8, from August 2007 to October 2017, and it's a ute-only system. Body style and engine both matter, so confirm your ute runs one of those V8s and check your exact build with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits header-and-system packages like this across the Illawarra. We'll confirm the kit suits your VE-VF ute, check clearances along the 2 1/2 run, and book the install once the vehicle is verified.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the PP5381-17 fit?
- It's listed for the Holden VE-VF ute (Aug 2007 to Oct 2017) with the 6.0 Gen IV or 6.2 LS3 V8, ute only. Confirm your exact build with the workshop.
- Is this just the headers?
- No — it's a 1 3/4 4-into-1 header set with a 2 1/2 ute system, so it covers the extractors plus the system behind them. We can confirm the full contents with you.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.