Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5382-59
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Wagon 1 7/8 Tuned Headers 3" Inch
Pacemaker Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Wagon 1 7/8 Tuned Headers 3" Inch System.
BrandPacemaker
Category: Extractors and headers
RRP $4891.13 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5382-59
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VE VF
- Stock status
- Confirmed on order
Routed for the wagon body, the Pacemaker PP5382-59 runs 1⅞ in tuned-length headers into a 3in system, listed to fit the Holden VE–VF 8-cylinder 6.0L/6.2L (Gen IV LS2/LS3) wagon.
Why the wagon-specific 3in system?
The Sportwagon floorpan and rear-axle area differ from the sedan and ute, so this package's 3in pipework is hung for the wagon body — the reason it carries its own part number. Pacemaker matches the 3in run to the 1⅞ in tuned-length headers for the VE–VF wagon.
What does the 1⅞ in tuned-length front half do?
The 1⅞ in primaries are length-matched to time the exhaust pulses, and at 1⅞ in the bore is the larger size suited to higher-rpm, higher-output Gen-IV work — it trades a little low-down velocity for more top-end flow. They replace the restrictive cast manifolds with mandrel-bent tube and feed the 3in system, so the whole front half is renewed rather than just the back of the exhaust.
Will it suit my VE–VF wagon?
It's listed to fit the Holden VE–VF 8-cylinder 6.0L/6.2L (Gen IV LS2/LS3) wagon; no specific year is published on this listing, so we confirm fit against your exact Sportwagon before ordering, since feed data can be imperfect. The engine and the wagon body are the two things we line up against the catalogue.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits these tuned-length Pacemaker headers across the Illawarra. We match the listing to your wagon, pull the cast manifolds, fit the 1⅞ in tuned primaries up to the collectors, and run the 3in wagon system on fresh gaskets, checking clearances as we go. RRP is listed at 4891.13 AUD; the fitting cost is quoted once the wagon is on the hoist.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the PP5382-59 the wagon system?
- Yes — the 3in pipework is routed for the VE–VF Sportwagon floorpan, distinct from the sedan and ute packages.
- What primary and system sizes does it run?
- 1⅞ in tuned-length primaries with a 3in system, matched by Pacemaker for the wagon.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.