Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5382-01
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, 1 7/8 Tuned Headers 2 1/2 Inch
Pacemaker Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, 1 7/8 Tuned Headers 2 1/2 Inch System.
BrandPacemaker
Category: Extractors and headers
RRP $4720.97 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5382-01
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VE VF
- Stock status
- Confirmed on order
Stepping up to 1⅞ in primaries, the Pacemaker PP5382-01 is a tuned-length header set feeding a 2½ in system, listed to fit the Holden VE–VF V8 (Gen IV 6.0L / 6.2L, LS2/LS3). The larger 1⅞ in primary is the size that suits a higher-rpm, higher-output Gen-IV build.
What does the 1⅞ in tuned-length primary suit?
Where a smaller header keeps gas speed up for the street, the 1⅞ in primary opens the runner bore for engines making more and revving harder — it trades a little low-rpm velocity for more top-end flow. 'Tuned-length' means the primaries are matched in length to time the exhaust pulses, and here they feed a 2½ in system. It's the front half for a more built LS2/LS3.
Why the 2½ in system pairing?
Pacemaker matches these 1⅞ in tuned headers to a 2½ in run for the VE–VF V8. The system diameter is part of the package's tuning balance with the larger primaries; we fit it as the matched pair rather than mixing sizes.
Will it suit my VE–VF V8?
It's listed to fit the Holden VE–VF 8-cylinder 6.0L/6.2L (Gen IV LS2/LS3); no body or year is published on this listing, so we confirm fit against your exact car before ordering. Bring the VIN and we'll check it.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits these tuned-length Pacemaker headers across the Illawarra. We match the listing to your VE–VF, remove the cast manifolds, fit the 1⅞ in primaries and the 2½ in system on fresh gaskets, and check clearances. RRP is listed at 4720.97 AUD; fitting is quoted on the vehicle.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- How does the 1⅞ in primary differ in character?
- A 1⅞ in primary opens the bore for higher-rpm, higher-output builds, trading some low-down velocity for more top-end flow versus a smaller primary.
- What system size does it run?
- A 2½ in system, matched by Pacemaker to the 1⅞ in tuned-length headers.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.