Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5382-07
Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 7/8" 4 into 1
Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 7/8" 4 into 1 Competition Headers 2 1/2" Sedan/Wagon System (SKU.
BrandPacemaker
Category: Extractors and headers
RRP $4720.97 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5382-07
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VE VF
- Stock status
- Confirmed on order
The Pacemaker PP5382-07 is the VE–VF Commodore sedan fitment — competition 1⅞ in 4-into-1 headers feeding a 2½ in sedan/wagon system, listed for the Holden Commodore VE–VF (Gen IV 6.0 / LS3 6.2) built July 2006 to October 2017.
What does this sedan package cover?
It's the competition front half and 2½ in system for the VE–VF Commodore sedan (the system is listed to suit sedan/wagon routing). Across the full July 2006 to October 2017 run, it replaces the cast Gen-IV manifolds with mandrel-bent tube and carries the gas back through the 2½ in run.
What does the competition 1⅞ in 4-into-1 suit?
The four 1⅞ in primaries merge in a single 4-into-1 collector. At 1⅞ in the primary is the larger competition bore — built for higher-rpm, higher-output LS3 work, trading a little low-down velocity for top-end flow versus a smaller street primary.
Will it suit my VE–VF Commodore?
It's listed to fit the Holden VE–VF Commodore sedan (Gen IV 6.0 / LS3 6.2, July 2006–October 2017), with the 2½ in system suited to sedan/wagon routing. We confirm that against your exact build before ordering, since feed data can be imperfect.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits these competition Pacemaker headers across the Illawarra. We match the listing to your Commodore, remove the cast manifolds, fit the 1⅞ in primaries to the 4-into-1 collectors, and run the 2½ in system on fresh gaskets. RRP is listed at 4720.97 AUD; fitting is quoted on the vehicle.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the PP5382-07 the sedan fitment?
- Yes — it's the VE–VF Commodore sedan package, with a 2½ in system listed to suit sedan/wagon routing. Confirm your body with the workshop.
- What primary size does it run?
- 1⅞ in competition primaries into a 4-into-1 collector — the larger, higher-rpm bore.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.