Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5382-09
Holden VE - VF Wagon Jul 2006 - Oct 2017 6.0 Gen IV - 6.2 LS3 V8 1 7/8" 4 into 1
Holden VE - VF Wagon Jul 2006 - Oct 2017 6.0 Gen IV - 6.2 LS3 V8 1 7/8" 4 into 1 Competition Headers 2 1/2" Wagon System.
BrandPacemaker
Category: Extractors and headers
RRP $4720.97 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5382-09
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VE VF
- Stock status
- Confirmed on order
The Pacemaker PP5382-09 is a set of 1-7/8in four-into-one competition headers with a matching 2-1/2in wagon system, listed to fit the Holden VE-VF wagon (Jul 2006 to Oct 2017) with the Gen IV 6.0 and 6.2 LS3 V8. It's a tuned-length primary header design built for the LS-powered wagon body.
What does this kit cover?
This is a header-back package: the 1-7/8in primary four-into-one headers replace the factory exhaust manifolds, and the included 2-1/2in wagon system carries the gases rearward. The "competition" tag and tuned primary length point at a performance bias rather than a quiet factory replacement. Because it's matched to the VE-VF wagon floorpan, the bends and hanger positions are cut for that body rather than the sedan or ute.
What is a header and where does it sit in the system?
Headers (often called extractors here) are the first section of the exhaust, bolting straight to the cylinder heads in place of the cast manifolds. A four-into-one design merges each bank's four primary tubes into a single collector, and the tube length is "tuned" to favour a particular part of the rev range. The trade-off is that aftermarket headers can change the exhaust note and, on a road car, raise compliance questions, so they suit owners who want a deliberate change rather than a like-for-like swap.
Will it suit my Holden VE-VF wagon?
It's listed to fit the Holden VE-VF wagon (Jul 2006 to Oct 2017) with the 6.0 Gen IV or 6.2 LS3 V8. Listed-to-fit is feed data, not a guarantee, so send your exact build, body style and engine and the workshop will confirm it lines up before anything is ordered.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men sells and fits Pacemaker headers in-house across the Illawarra. Header swaps on the LS V8 are involved work — heads-access, gasket replacement and clearance checks — so we confirm the fitment against your wagon, check the 2-1/2in system routing, and book the hoist. The RRP is $4720.97, and we'll talk through compliance for your use before fitting.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the PP5382-09 fit my Holden Commodore wagon?
- It is listed to fit the Holden VE-VF wagon (Jul 2006 to Oct 2017) with the 6.0 Gen IV or 6.2 LS3 V8. Confirm your exact body style and engine with the workshop before ordering.
- Is this just the headers or a full system?
- It is the 1-7/8in four-into-one headers plus a matching 2-1/2in wagon system, so it covers the run from the heads rearward as listed.
- Are these road legal?
- Aftermarket competition headers can raise registration and compliance questions in NSW. Talk to the workshop about your intended use before fitting.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.