Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5387-01
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 2 1/2 Inch System
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 2 1/2 Inch System.
BrandPacemaker
Category: Extractors and headers
RRP $4604.16 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5387-01
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VE VF
- Stock status
- Confirmed on order
The Pacemaker PP5387-01 is a set of Tri-Y headers with a 2-1/2in system, listed to fit the Holden VE-VF, 8-cylinder 6.0L and 6.2L Gen IV LS2 and LS3. It's a header-back package using a Tri-Y primary design.
What does this kit cover?
This bundles Tri-Y headers off the heads with a matching 2-1/2in system for the VE-VF with the Gen IV LS V8. The headers replace the factory manifolds, and the 2-1/2in pipe carries the gases rearward. The Tri-Y layout and 2-1/2in sizing make it a different bias to the bigger 1-7/8in/3in competition kits in the same family.
What is a Tri-Y header and what does it change?
A Tri-Y header pairs the primary tubes in two stages — four primaries merge into two, then into one — rather than the single four-into-one merge. The idea is a broader spread of low and mid-range response. As with any header it bolts to the cylinder heads as the first section of the exhaust, and the honest trade-offs are a changed note and added road-compliance considerations, so it suits owners after a deliberate change.
Will it suit my Holden VE-VF?
It's listed to fit the Holden VE-VF with the 6.0L or 6.2L Gen IV LS2/LS3 V8. That's feed data, not a guarantee, so confirm your exact series, body and engine with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men sells and fits this Pacemaker package in-house in the Illawarra. Header work on the LS V8 means manifold removal, fresh gaskets and clearance checks against the 2-1/2in system, so we verify the fitment to your car and book the hoist. The listed RRP is $4604.16.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What is a Tri-Y header?
- It is a header design that merges the primary tubes in two stages rather than a single four-into-one merge, aimed at a broader low and mid-range spread.
- What size is the system?
- The matching system listed with these Tri-Y headers is 2-1/2in.
- Does it suit both LS2 and LS3?
- It is listed for the Gen IV LS2 and LS3 6.0L/6.2L V8. Confirm your exact engine with the workshop.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.