Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5387-07
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute Tri-Y Headers 2 1/2 Inch
Pacemaker Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute Tri-Y Headers 2 1/2 Inch System.
BrandPacemaker
Category: Extractors and headers
RRP $4604.16 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5387-07
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VE VF
- Stock status
- Confirmed on order
Pairing a tri-Y header design with a 2½ in ute system, the Pacemaker PP5387-07 is listed to fit the Holden VE–VF 8-cylinder 6.0L/6.2L (Gen IV LS2/LS3) ute. The tri-Y merge is the distinguishing layout; the 2½ in pipework is routed for the ute body.
Why a tri-Y on a street V8 ute?
A tri-Y pairs the primaries and merges them in two stages instead of a single 4-into-1 collector. That staged merge tends to favour low and mid-range torque — useful in a working V8 ute that spends time pulling rather than at the top of the tacho. It feeds the 2½ in ute system here.
What makes this the ute fitment?
The 2½ in pipework is hung and routed for the VE–VF ute tray-back floorpan, which is why it's a separate part from the sedan and wagon tri-Y systems. Pacemaker lists it for the Gen-IV LS2/LS3 V8 ute.
Will it suit my Holden ute?
It's listed to fit the Holden VE–VF 8-cylinder 6.0L/6.2L (Gen IV LS2/LS3) ute; no specific year is published on this listing, so we confirm fit against your exact ute before ordering, since feed data can be imperfect. The engine and the ute body are the two things we line up against the catalogue before the order goes in.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits these tri-Y Pacemaker headers across the Illawarra. We match the listing to your ute, remove the cast manifolds, fit the tri-Y headers up to the collectors, and run the 2½ in ute system on fresh gaskets, checking clearances as we go. RRP is listed at 4604.16 AUD; the fitting cost is quoted once the ute is on the hoist.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the tri-Y design give a ute?
- The two-stage merge tends to broaden low and mid-range torque, which suits a working V8 ute over a single-plane 4-into-1.
- Is the PP5387-07 the ute system?
- Yes — the 2½ in pipework is routed for the VE–VF ute floorpan. Confirm your body with the workshop.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.