Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5387-09
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Wagon Tri-Y Headers 2 1/2 Inch
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Wagon Tri-Y Headers 2 1/2 Inch System.
BrandPacemaker
Category: Extractors and headers
RRP $4604.16 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5387-09
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VE VF
- Stock status
- Confirmed on order
Routed for the wagon body, the Pacemaker PP5387-09 runs a tri-Y header design into a 2½ in system, listed to fit the Holden VE–VF 8-cylinder 6.0L/6.2L (Gen IV LS2/LS3) wagon. The tri-Y merge and the Sportwagon routing define this part.
What does the tri-Y bring to a wagon?
A tri-Y pairs the primaries and merges them in two stages rather than a single 4-into-1 collector. That staged merge tends to broaden low and mid-range torque — useful in a load-carrying Sportwagon. It feeds the 2½ in system here on the VE–VF Gen-IV V8 wagon.
Why a wagon-specific routing?
The Sportwagon floorpan and rear-axle area differ from the sedan and ute, so the 2½ in pipework is hung for the wagon body — the reason it's a separate part number rather than a shared system. Pacemaker lists it for the Gen-IV LS2/LS3 V8 wagon, with the routing shaped around the longer wagon tail.
Will it suit my VE–VF wagon?
It's listed to fit the Holden VE–VF 8-cylinder 6.0L/6.2L (Gen IV LS2/LS3) wagon; no specific year is published on this listing, so we confirm fit against your exact Sportwagon before ordering, since feed data can be imperfect. The engine and the wagon body are the two things we line up against the catalogue.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits these tri-Y Pacemaker headers across the Illawarra. We match the listing to your wagon, remove the cast manifolds, fit the tri-Y headers up to the collectors, and run the 2½ in wagon system on fresh gaskets, checking clearances as we go. RRP is listed at 4604.16 AUD; the fitting cost is quoted once the wagon is on the hoist.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the PP5387-09 the wagon tri-Y system?
- Yes — tri-Y headers with a 2½ in system routed for the VE–VF Sportwagon floorpan. Confirm your body with the workshop.
- What does the tri-Y layout do?
- It merges the primaries in two stages rather than all at once, which tends to broaden low and mid-range torque.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.