Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7707.93Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partSSMKFD0101
Ford BA BF V8 4V Sedan 2.5in Dual With Extractors Hotdog/Muffler
MPI Automotive Ford BA BF V8 4V Sedan 2.5in Dual With Extractors Hotdog/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $5140.78 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKFD0101
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Ford
- Stock status
- In stock at supplier
The MPI Automotive SSMKFD0101 takes the 2.5in dual BA/BF V8 sedan layout and runs a hotdog centre silencer ahead of the rear muffler. That hotdog is the distinguishing piece — a straight-through resonator that trims drone without choking flow.
What the hotdog does in this system
A hotdog is a compact straight-through silencer fitted as the centre section. Here it sits ahead of the rear muffler on a 2.5in dual run, taking the edge off mid-range resonance while letting the muffler set the final note. The combination gives a different character to a twin-muffler setup without changing the bore. It starts at the engine with extractors, so it's a full run from the heads back on the four-valve Boss V8 sedans.
What are extractors and what do they change?
Extractors, also called headers, replace the cast factory manifolds with tubular branches so each cylinder gets its own path off the engine. Running extractors, a hotdog centre and a rear muffler on a 2.5in dual layout reworks the Falcon sedan's exhaust from the heads back. It's more involved than a tailpipe swap, and tuning or compliance questions are best worked through with the workshop. Material isn't published by the supplier.
Will it suit my Ford BA/BF sedan?
It's listed to fit the Ford BA/BF V8 4V Sedan, covering the four-valve Boss V8 Falcon sedans of that era. Feed data can be imperfect, so confirm your exact sedan build with the workshop before ordering the SSMKFD0101. The RRP is AUD 5,140.78.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits full Falcon sedan systems like this in-house across the Illawarra. We check clearances around the sedan floor, hang the 2.5in dual run, and confirm the hotdog and muffler sit clear of the body. Send your build and we'll confirm fitment and lead time before ordering.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What's the difference a hotdog makes here?
- It's a straight-through centre resonator that trims mid-range drone ahead of the rear muffler, on a 2.5in dual layout for the BA/BF V8 sedan.
- Will it fit my BA/BF V8 sedan?
- It's listed to fit the BA/BF V8 4V Sedan. Confirm your exact variant with the workshop before ordering.
- Are the extractors included?
- Yes. The SSMKFD0101 is listed with extractors, so it's a full system from the engine back.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View part
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7030.42Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.