Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7707.93Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partSSMKFD0103
Ford BA BF V8 4V Sedan 2.5in Dual With Extractors Muffler/Tailpipe
MPI Automotive Ford BA BF V8 4V Sedan 2.5in Dual With Extractors Muffler/Tailpipe.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4845.05 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKFD0103
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Ford
- Stock status
- In stock at supplier
The MPI Automotive SSMKFD0103 is the pared-back option in this 2.5in dual BA/BF V8 sedan range: extractors into a single muffler and straight out to the tailpipe, with no centre silencer in the run.
What the muffler-to-tailpipe layout means
This 2.5in dual system carries one muffler and finishes at the tailpipe, with no hotdog or second silencer between. Fewer silencing stages means a more direct path to the rear, leaning the note livelier than a twin-muffler or hotdog setup, though the record holds no measured sound data to quote. It starts at the engine with extractors, so it's still a full run from the heads back on the four-valve Boss V8 sedans.
What are extractors and what do they change?
Extractors, also called headers, replace the cast factory manifolds with tubular branches so each cylinder gets its own path off the engine. The muffler is the chambered silencer that does the quietening before the tailpipe. Running extractors and a muffler on a 2.5in dual layout reworks the Falcon sedan's exhaust from the heads back. It's more involved than a tailpipe swap, so tuning and compliance questions are best worked through with the workshop.
Will it suit my Ford BA/BF sedan?
It's listed to fit the Ford BA/BF V8 4V Sedan, covering the four-valve Boss V8 Falcon sedans of that era. Feed data can be imperfect, so confirm your exact sedan build with the workshop before ordering the SSMKFD0103. The RRP is AUD 4,845.05.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits full Falcon sedan systems like this in-house across the Illawarra. We check clearances around the sedan floor, hang the 2.5in dual run, and confirm the muffler and tailpipe sit clear of the body. Send your build and we'll confirm fitment and lead time before ordering.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the SSMKFD0103 have a centre silencer?
- No. It runs a single muffler out to the tailpipe with no hotdog, on a 2.5in dual layout for the BA/BF V8 sedan.
- Will the SSMKFD0103 fit my BA/BF V8 sedan?
- It's listed to fit the BA/BF V8 4V Sedan. Confirm your exact Falcon variant with the workshop before ordering.
- Are the extractors part of the system?
- Yes. The SSMKFD0103 is listed with extractors, so it's a full system from the engine back.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View part
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7030.42Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.