Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7707.93Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partSSMKFD0144
Ford BA BF V8 4V Ute 2.5in Dual With Extractors Muffler/Tailpipe
Ford BA BF V8 4V Ute 2.5in Dual With Extractors Muffler/Tailpipe.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $5045.08 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKFD0144
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Ford
- Stock status
- In stock at supplier
The MPI Automotive SSMKFD0144 is a 2.5in dual extractor and exhaust package listed to fit the Ford Falcon BA/BF V8 4V ute. It runs tuned extractors off the heads into 2.5in dual pipework, finishing through a muffler and out a tailpipe.
What are extractors and what do they do?
Extractors, or headers, replace the cast factory manifolds with tubular runners — one per cylinder — that merge downstream. On a Falcon V8 the cast manifold is the first restriction in the exhaust, so the runners are aimed at letting each cylinder breathe more freely than stock. This part is specced for the 4V (four-valve) head, and from the runners the SSMKFD0144 carries 2.5in pipework back. The change over stock is in flow and exhaust note, not any figure we can quote, since we hold no dyno or sound data for this part.
What does this 2.5in dual package cover?
This is the extractor-back package for the Ford Falcon BA/BF V8 4V ute: tuned extractors at the heads, 2.5in dual pipework, then a muffler and a tailpipe finish. A single muffler out to the tailpipe makes this a more direct layout than the twin-muffler versions in this family. Material isn't published by the supplier, so confirm the pipe specification with the workshop.
Will it suit my BA/BF ute?
It's listed to fit the Ford Falcon BA/BF V8 4V ute. The BA/BF ute and sedan share much of the driveline but differ in mounts and floorpan, so this part is specced for the ute body and the 4V head. Feed data can be imperfect, so treat the listing as "listed to fit" rather than guaranteed — confirm your exact BA/BF build, engine and body with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits extractor and full-system packages like this in-house across the Illawarra. The cast manifolds come off, the head faces are cleaned, fresh gaskets go in and the runners are torqued evenly before the 2.5in pipework, muffler and tailpipe are hung and aligned. It's a special-order package with an RRP of $5,045.08. Send us your BA/BF details and we'll confirm clearances and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the SSMKFD0144 fit my Ford Falcon BA/BF V8 ute?
- It's listed to fit the Ford Falcon BA/BF V8 4V ute. Confirm your exact chassis and engine with the workshop before ordering, as feed data can vary by build.
- What does the SSMKFD0144 run at the rear?
- It runs 2.5in dual pipework off the extractors through a single muffler and out a tailpipe, a more direct finish than the twin-muffler versions.
- Is this the extractors only or the whole system?
- It's the extractor-back package — the tuned 4V extractors plus the 2.5in pipework, muffler and tailpipe together.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View part
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7030.42Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.