Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7707.93Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partSSMKFD0154
Ford BA BF V8 4V Ute 2.5in L & R With Extractors Hotdog/Muffler
Ford BA BF V8 4V Ute 2.5in L & R With Extractors Hotdog/Muffler (SSMKFD0154) Fits FORD. Fast shipping.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $5974.62 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKFD0154
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Ford
- Stock status
- In stock at supplier
For the BA-BF ute, the MPI Automotive SSMKFD0154 runs a left-and-right 2.5in layout with a hotdog and rear muffler, listed to fit the BA-BF V8 4V ute. The two-stage silencing on dual banks suits a working V8 ute that does highway miles.
Why the ute hotdog-and-muffler pairing on dual 2.5in banks?
The SSMKFD0154 splits the 4V V8 into left and right 2.5in legs and runs a hotdog resonator with a rear muffler. The hotdog knocks down the harsher mid-range rasp, while the rear muffler handles the bulk of the silencing — useful on a BA-BF ute that spends time on the open road and where cabin drone matters. The dual 2.5in routing is shaped for the ute body and its tray.
What does the package cover?
It's a header-back system: tuned-length extractors at the cylinder heads, left and right 2.5in pipework, a hotdog resonator and a rear muffler. The factory cast manifolds and the original BA-BF exhaust both come out and the SSMKFD0154 goes in as one matched set, with the primaries sized to the 2.5in legs so the V8 system flows as a unit on the ute.
What's an extractor and what's the trade-off?
Extractors are tuned-length headers replacing the restrictive cast manifolds the BA-BF 4V V8 wore from the factory, giving each cylinder its own primary tube before the merge to cut back-pressure and improve scavenging. The honest catch: they sit in the engine-bay heat zone, take labour to fit, and change the note — here cleaned up by the hotdog and rear muffler rather than left raw.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits MPI extractor systems like this across the Illawarra. The work means removing the factory manifolds, hanging the extractors, then routing both 2.5in legs through the hotdog and rear muffler with clearance checks around the tray and over the axle. It's listed to fit the BA-BF V8 4V ute; at an RRP of $5,974.62 it's a special-order set, so we confirm your exact build and lead time before booking the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What's the hotdog for on this system?
- The hotdog resonator sits ahead of the rear muffler and tames the harsher mid-range rasp, while the muffler does the main silencing — a cleaner tone for a ute that does highway miles.
- Will the SSMKFD0154 fit my BA-BF ute?
- It's listed to fit the BA-BF V8 4V ute. Confirm your exact build with the workshop before ordering, as extractor systems are tied to the specific body and driveline.
- Is it a full system or just headers?
- It's a header-back system: extractors plus left and right 2.5in pipework, a hotdog and a rear muffler, supplied as one matched SSMKFD0154 kit.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View part
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7030.42Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.