Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7707.93Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partSSMKFD0180
Ford FG V8 Sedan 3in Dual With Extractors Muffler
Ford FG V8 Sedan 3in Dual With Extractors Muffler/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $5849.60 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKFD0180
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Ford
- Stock status
- In stock at supplier
The MPI Automotive SSMKFD0180 steps the FG V8 sedan up to 3in dual pipework off tuned extractors, then quietens it with a twin-muffler layout. The larger 3in bore paired with two mufflers is the big-pipe-but-civil end of the extractor range.
What does 3in dual pipework suit?
This package leads on bore. Running 3in dual pipework off the extractors gives the Falcon V8 a larger cross-section back from the heads, the choice for an owner who wants more pipe under the car. Two mufflers in the run then hold the note down despite the bigger pipework, so it reads as a road-civil sedan rather than a loud one. We hold no dyno or sound data, so we won't quote a gain — the honest change is in flow and note on a 3in bore.
What do the extractors replace?
Extractors, also called headers, swap the cast factory manifolds for tubular runners — one per cylinder — that merge downstream. On the Falcon V8 the cast manifold is the first restriction in the exhaust, so the runners are aimed at letting each cylinder leave more freely than stock before the 3in dual pipework carries it back to the twin mufflers.
Will it suit my FG sedan?
It's listed to fit the Ford Falcon FG V8 sedan. The supplier doesn't publish a capacity figure, so the engine is given simply as V8, and no year is recorded, so we won't state one. Material isn't published either. Treat the listing as "listed to fit" rather than a promise of exact fit, and confirm your exact FG build and engine with the workshop before ordering its 3in routing.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits 3in extractor packages like this in-house across the Illawarra. The cast manifolds come off, the head faces are cleaned and new gaskets fitted, the runners are torqued evenly, then the 3in pipework and both mufflers are hung and aligned under the sedan floor. It's a special-order package with an RRP of $5,849.60. Send us your FG details and we'll confirm clearances and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the SSMKFD0180 fit my Ford Falcon FG V8 sedan?
- It's listed to fit the Ford Falcon FG V8 sedan. Confirm your exact build and engine with the workshop before ordering, as feed data can vary.
- How big is the pipework on the SSMKFD0180?
- It runs 3in dual pipework off the extractors, finishing through a twin-muffler layout that keeps the note road-civil.
- Does it include the extractors?
- Yes — it's the extractor-back package, with the tuned extractors plus the 3in pipework and both mufflers supplied together.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View part
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7030.42Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.