Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7707.93Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partSSMKFD0181
Ford FG V8 Sedan 3in Dual With Extractors Hotdog/Muffler
Ford FG V8 Sedan 3in Dual With Extractors Hotdog/Muffler (SKU: SSMKFD0181) Engineered. Quality guaranteed.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $5794.06 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKFD0181
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Ford
- Stock status
- In stock at supplier
The MPI Automotive SSMKFD0181 runs 3in dual pipework off tuned extractors and silences it with a hotdog resonator feeding a rear muffler. It's the big-bore FG V8 sedan package that keeps a two-stage silencer rather than a pair of mufflers.
Why 3in with a hotdog and muffler?
This package leads on the pairing of bore and silencing. The 3in dual pipework gives the Falcon V8 a larger cross-section back from the heads, while a hotdog — a straight-through centre resonator — sits ahead of the rear muffler to trim resonance in two stages. That combination keeps a road note on bigger pipe without leaning on twin mufflers. We hold no measured sound data, so we won't quote a level; the honest description is a hotdog-and-muffler tune on a 3in bore.
What do extractors change on the FG V8?
Extractors, also called headers, swap the cast factory manifolds for tubular runners — one per cylinder — that merge downstream. On the Falcon V8 the cast manifold is the first restriction, so the runners are aimed at letting each cylinder breathe more freely than stock before the 3in dual pipework carries the gas through the hotdog and muffler.
Will it suit my FG sedan?
It's listed to fit the Ford Falcon FG V8 sedan. The supplier gives the engine simply as V8 with no capacity figure published, and no year is recorded, so we won't state one. Material isn't published either. Treat the listing as "listed to fit" and confirm your exact FG build with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits 3in extractor packages like this in-house across the Illawarra. The cast manifolds come off, the head faces are cleaned, fresh gaskets go in and the runners are torqued evenly, then the 3in dual pipework, hotdog and muffler are hung and aligned under the sedan floor. It's a special-order package with an RRP of $5,794.06. Send us your FG details and we'll confirm clearances and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What silencing does the SSMKFD0181 use?
- A hotdog resonator ahead of a rear muffler on 3in dual pipework — a two-stage layout rather than a pair of mufflers.
- Will it fit my FG Falcon V8 sedan?
- It's listed to fit the Ford Falcon FG V8 sedan. Confirm your exact variant with the workshop before ordering.
- What does the hotdog do here?
- The hotdog is the centre resonator — a straight-through unit that softens resonance ahead of the rear muffler. It pairs with the muffler in this layout.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View part
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7030.42Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.