Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7707.93Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partSSMKFD0184
Ford FG V8 Sedan 2.5in L & R With Extractors Muffler
Ford FG V8 Sedan 2.5in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0184) Engineered. Quality guaranteed.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $5868.93 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKFD0184
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Ford
- Stock status
- In stock at supplier
The MPI Automotive SSMKFD0184 routes the FG V8 sedan left-and-right off the extractors, with a 2.5in pipe and its own muffler down each side rather than a shared centre section. That bank-per-side layout is the defining feature of this package.
Why a left-and-right twin-muffler layout?
This package leads on routing. The 2.5in pipework runs left-and-right under the sedan, each side carrying its own muffler instead of collecting into a single centre box. That keeps the two banks separate the whole way back and leans toward a settled note, since two mufflers hold a fair amount of silencing in the system. We have no measured sound data to quote, so the honest description is a 2.5in left-and-right run with a muffler per side.
What do extractors replace?
Extractors, also called headers, swap the cast factory manifolds for tubular runners — one per cylinder — that merge downstream. On the Falcon V8 the cast manifold is the first restriction, so the runners are aimed at letting each cylinder breathe more freely than stock before the 2.5in pipework carries each bank back to its muffler.
Will it suit my FG sedan?
It's listed to fit the Ford Falcon FG V8 sedan, matched to the V8 sedan body rather than the six-cylinder or ute. The supplier gives the engine simply as V8 with no capacity figure, and no year is recorded, so we won't state one. Material isn't published either. Treat the listing as "listed to fit" and confirm your exact FG build with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits left-and-right extractor systems like this in-house across the Illawarra. The cast manifolds come off, the head faces are cleaned, fresh gaskets go in and the runners are torqued evenly, then the 2.5in pipework and both mufflers are hung and aligned under the sedan floor. It's a special-order package with an RRP of $5,868.93. Send us your FG details and we'll confirm clearances and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the SSMKFD0184 fit my Ford Falcon FG V8 sedan?
- It's listed to fit the Ford Falcon FG V8 sedan. Confirm your exact Falcon variant with the workshop before ordering, as feed data can vary.
- How is the SSMKFD0184 routed?
- Left-and-right, with a 2.5in pipe and a muffler down each side rather than a shared centre section.
- Does it include the extractors?
- Yes — it's the extractor-back package, with the extractors plus the 2.5in pipework and both mufflers supplied together.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View part
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7030.42Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.