Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7707.93Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partSSMKFD0185
Ford FG V8 Sedan 2.5in L & R With Extractors Hotdog/Muffler
MPI Automotive Ford FG V8 Sedan 2.5in L & R With Extractors Hotdog/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $5784.87 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKFD0185
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Ford
- Stock status
- In stock at supplier
The MPI Automotive SSMKFD0185 runs the FG V8 sedan left-and-right on 2.5in pipework, then takes the edge off with a hotdog resonator feeding a rear muffler. A two-stage silencer on a bank-per-side layout is what sets this package apart.
What does the hotdog-and-muffler pairing give you?
This package leads on its silencing mix. The 2.5in pipework runs left-and-right under the sedan, with a hotdog — a straight-through resonator — placed ahead of the rear muffler so resonance is trimmed in two stages rather than by one box. That keeps a road-civil note while still moving the cast manifolds out of the way. We hold no measured sound data, so we won't put a level on it; the honest configuration is a hotdog and muffler on a 2.5in left-and-right run.
What are extractors and what do they change?
Extractors, or headers, replace the cast factory manifolds with tubular runners — one per cylinder — that merge downstream. On the Falcon V8 the cast manifold is the first restriction in the exhaust, so the runners are aimed at letting each cylinder breathe more freely than stock before the 2.5in pipework carries it through the hotdog and muffler.
Will it suit my FG sedan?
It's listed to fit the Ford Falcon FG V8 sedan. The supplier gives the engine simply as V8 with no capacity figure published, and no year is recorded, so we won't state one. Material isn't published either. Treat the listing as "listed to fit" rather than a promise of exact fit, and confirm your exact FG build and engine with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits left-and-right extractor packages like this in-house across the Illawarra. The cast manifolds come off, the head faces are cleaned, fresh gaskets go in and the runners are torqued evenly before the 2.5in pipework, hotdog and muffler are hung and aligned under the sedan floor. It's a special-order package with an RRP of $5,784.87. Send us your FG details and we'll confirm clearances and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the SSMKFD0185 fit my Ford Falcon FG V8 sedan?
- It's listed to fit the Ford Falcon FG V8 sedan. Confirm your exact build and engine with the workshop before ordering, as feed data can vary.
- What silencing does the SSMKFD0185 use?
- A hotdog resonator ahead of a rear muffler on a 2.5in left-and-right run — two stages that trim resonance before the muffler quietens the rest.
- Is this the extractors only or the full system?
- It's the extractor-back package — the tuned extractors plus the 2.5in pipework, hotdog and muffler together.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View part
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7030.42Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.