Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7707.93Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partSSMKFD0188
Ford FG V8 Sedan 3in L & R With Extractors Muffler
Ford FG V8 Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0188) Engineered. Quality guaranteed.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $6844.27 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKFD0188
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Ford
- Stock status
- In stock at supplier
The MPI Automotive SSMKFD0188 is a 3in left-and-right extractor and exhaust package listed to fit the Ford Falcon FG V8 sedan. It runs tuned extractors off the heads into 3in pipework, finishing through a twin-muffler layout.
What are extractors and what do they change?
Extractors, also called headers, swap the cast factory manifolds for tubular runners — one per cylinder — that merge downstream. On a Falcon V8 the cast manifold is the first restriction in the exhaust, so the runners are aimed at letting each cylinder leave more freely than stock. The SSMKFD0188 then steps up to 3in pipework. The change over stock is in flow and exhaust note rather than any figure we can quote, since we hold no dyno or sound data for this part.
What does this 3in twin-muffler package cover?
This is the extractor-back package for the FG V8 sedan: tuned extractors at the heads, 3in pipework run in a left-and-right layout, then two mufflers in the run. The twin-muffler setup is the quieter silencing option at this bore, holding the note down for a road-driven sedan despite the 3in pipework. Material isn't published by the supplier, so confirm the pipe specification with the workshop if that matters to your build.
Will it suit my FG sedan?
It's listed to fit the Ford Falcon FG V8 sedan. The supplier doesn't publish a capacity figure for this listing, so the engine is given simply as V8. Feed data can be imperfect, so treat the listing as "listed to fit" rather than guaranteed, and confirm your exact FG build and engine with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits 3in extractor packages like this in-house across the Illawarra. The cast manifolds come off, the head faces are cleaned and new gaskets fitted, the runners are torqued evenly, then the 3in pipework and both mufflers are hung and aligned under the sedan floor. It's a special-order package with an RRP of $6,844.27. Send us your FG details and we'll confirm clearances and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the SSMKFD0188 fit my Ford Falcon FG V8 sedan?
- It's listed to fit the Ford Falcon FG V8 sedan. Confirm your exact build and engine with the workshop before ordering, as feed data can vary.
- What size and silencing does the SSMKFD0188 use?
- It runs 3in pipework off the extractors in a left-and-right layout, through a twin-muffler setup — the quieter silencing option at this bore.
- Does it include the extractors?
- Yes — it's the extractor-back package, with the tuned extractors plus the 3in pipework and both mufflers supplied together.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View part
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7030.42Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.