Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7707.93Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partSSMKFD0189
Ford FG V8 Sedan 3in L & R With Extractors Hotdog/Muffler
Ford FG V8 Sedan 3in L & R With Extractors Hotdog/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $6779.88 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKFD0189
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Ford
- Stock status
- In stock at supplier
The MPI Automotive SSMKFD0189 is a 3in left-and-right exhaust system with extractors, listed to fit the Ford FG V8 Sedan. It runs a hotdog-then-muffler layout and replaces the exhaust from the engine back.
What does this system cover?
This is a left-and-right (twin) 3in system built around extractors for the FG V8 Sedan. It starts at the engine with extractors and runs a hotdog into a muffler down the line, so the front of the exhaust and the silencing come as one matched package. The L-and-R layout gives the V8 a pipe per bank rather than collapsing into a single line.
What are extractors and what does a hotdog-then-muffler layout change?
Extractors, or headers, replace the cast factory manifolds with tubular branches so each cylinder has its own path off the engine. A hotdog is a straight-through centre silencer that trims resonance without much volume loss, and the muffler behind it does the heavier quietening. Pairing a hotdog with a rear muffler usually lands between a twin-muffler setup and a louder open arrangement. On a 3in twin run with extractors, this reworks the FG's exhaust from the heads back; it's a workshop fit, with tuning and compliance handled per vehicle.
Will it suit my Ford FG?
It's listed to fit the Ford FG V8 Sedan. The FG is the Falcon platform and this listing is matched to the V8 sedan body. Feed data can be imperfect, so confirm your exact FG build with the workshop before the SSMKFD0189 is ordered.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits twin extractor systems like this in-house across the Illawarra. We fit the extractors, hang the 3in left and right runs, and confirm the hotdog and muffler sit correctly under the sedan. The RRP is AUD 6,779.88. Send your build and we'll confirm fitment and lead time before ordering.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What size is the SSMKFD0189?
- It's a 3in left-and-right system, so it runs a 3in pipe down each side for the FG V8 Sedan.
- Does it include extractors?
- Yes. The extractors are part of the package, so it replaces the exhaust from the engine back.
- What's the silencer layout?
- A hotdog centre into a rear muffler, which generally lands between a twin-muffler setup and a louder open layout. The workshop can talk through the options.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View part
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7030.42Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.