Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7707.93Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partSSMKFD0216
Ford FG 5.4L V8 Ute 3in Dual With Extractors Muffler
Ford FG 5.4L V8 Ute 3in Dual With Extractors Muffler/Muffler (SSMKFD0216) Fits FORD. Fast shipping.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $5615.43 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKFD0216
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Ford
- Stock status
- In stock at supplier
The MPI Automotive SSMKFD0216 is a 3in dual extractor and exhaust package listed to fit the Ford Falcon FG 5.4L V8 ute. It runs tuned extractors off the heads into 3in dual pipework, finishing through a twin-muffler layout.
What are extractors and what do they change?
Extractors, also called headers, swap the cast factory manifolds for tubular runners — one per cylinder — that merge downstream. On a Falcon V8 the cast manifold is the first restriction in the exhaust, so the runners are aimed at letting each cylinder leave more freely than stock. The SSMKFD0216 then steps the pipework up to 3in, the larger bore in this family. The change over stock is in flow and exhaust note rather than any figure we can quote, as we hold no dyno or sound data for this part.
What does this twin-muffler 3in package cover?
This is the extractor-back package for the FG 5.4L V8 ute, in the muffler-muffler configuration: tuned extractors at the heads, 3in dual pipework down the car, and two mufflers in the run rather than a hotdog-and-muffler pairing. The twin-muffler layout is the quieter of the silencing options at this bore, holding the note down despite the 3in pipework. Material isn't published by the supplier, so confirm the pipe specification with the workshop if that matters to your build.
Will it suit my FG 5.4L Falcon ute?
It's listed to fit the Ford Falcon FG 5.4L V8 ute — the larger-capacity V8 in the FG range. Feed data can be imperfect, so treat the listing as "listed to fit" rather than guaranteed, and confirm your exact FG build, engine and body with the workshop before ordering its 3in routing.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits 3in extractor packages like this in-house across the Illawarra. The cast manifolds come off, the head faces are cleaned and new gaskets fitted, the runners are torqued evenly, then the 3in pipework and both mufflers are hung and aligned for clearance. It's a special-order package with an RRP of $5,615.43. Send us your FG details and we'll confirm clearances and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the SSMKFD0216 fit my Ford Falcon FG 5.4L V8 ute?
- It's listed to fit the Ford Falcon FG 5.4L V8 ute. Confirm your exact engine and build with the workshop before ordering, as feed data can vary.
- How big is the pipework on the SSMKFD0216?
- It runs 3in dual pipework off the extractors, through a twin-muffler layout.
- Why two mufflers instead of a hotdog?
- The twin-muffler layout is the quieter silencing option at 3in, which suits owners after the bigger bore without the extra volume an open hotdog setup brings.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View part
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7030.42Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.