Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7707.93Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partSSMKFD0221
Ford FG 5.4L V8 Ute 2.5in L & R With Extractors Hotdog/Muffler
Ford FG 5.4L V8 Ute 2.5in L & R With Extractors Hotdog/Muffler (SKU: SSMKFD0221) Engineered. Quality guaranteed.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $5943.66 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKFD0221
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Ford
- Stock status
- In stock at supplier
The MPI Automotive SSMKFD0221 runs the 5.4L V8 FG ute left-and-right on 2.5in pipework, leading with a hotdog resonator into a rear muffler. A two-stage silencer on a bank-per-side ute layout is what sets this package apart.
What does hotdog-then-muffler give on this ute?
This package leads on its silencing order. The 2.5in pipework runs left-and-right under the tray, and a hotdog — a straight-through resonator — sits ahead of the rear muffler, so resonance is trimmed first and the muffler quietens the rest. That keeps the 5.4L ute's note settled for street use. We hold no measured sound data, so we won't put a level on it; the honest configuration is a hotdog and muffler on a 2.5in left-and-right run.
What are extractors and what do they change?
Extractors, or headers, replace the cast factory manifolds with tubular runners — one per cylinder — that merge downstream. On the Falcon V8 the cast manifold is the first restriction in the exhaust, so the runners are aimed at letting each cylinder breathe more freely than stock before the 2.5in pipework carries it through the hotdog and muffler.
Will it suit my FG 5.4L Falcon ute?
It's listed to fit the Ford Falcon FG 5.4L V8 ute — the larger-capacity V8 in the FG range, distinct from the 5.0L variant. No year is recorded, so we won't state one, and material isn't published by the supplier. Treat the listing as "listed to fit" and confirm your exact FG build, engine and body with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits left-and-right extractor packages like this in-house across the Illawarra. The cast manifolds come off, the head faces are cleaned, fresh gaskets go in and the runners are torqued evenly before the 2.5in pipework, hotdog and muffler are hung and aligned under the tray. It's a special-order package with an RRP of $5,943.66. Send us your FG details and we'll confirm clearances and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What silencing does the SSMKFD0221 use?
- A hotdog resonator ahead of a rear muffler on a 2.5in left-and-right run — two stages that trim resonance before the muffler quietens the rest.
- Will the SSMKFD0221 suit my Ford Falcon FG 5.4L V8 ute?
- It's listed to fit the Ford Falcon FG 5.4L V8 ute. Confirm your exact engine and build with the workshop before ordering, as feed data can vary.
- Does the package include the extractors?
- Yes — it's the extractor-back package, with the extractors plus the 2.5in pipework, hotdog and muffler supplied together.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View part
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7030.42Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.