Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7707.93Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partSSMKFD0268
Ford Falcon & FPV 5.0L Supercharged V8 High Flow Cats & Connecting Pipes to Factory
Ford Falcon & FPV 5.0L Supercharged V8 High Flow Cats & Connecting Pipes to Factory Manifolds (SSMKFD0268).
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $1672.04 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKFD0268
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Stock status
- In stock at supplier
The MPI Automotive SSMKFD0268 is a high-flow catalytic converter and connecting-pipe set listed to fit the supercharged 5.0L V8 Ford Falcon and FPV, joining to the factory manifolds. It replaces the factory cat section between the manifolds and the rest of the system.
What does the SSMKFD0268 cover?
This kit is the cat-and-connecting-pipe portion of the exhaust: it bolts to the factory manifolds on the supercharged 5.0L V8 and carries the gas back through high-flow catalytic converters into the existing system. It is not a full cat-back or a header set — it is the converter section, so it pairs with the factory manifolds rather than replacing them. RRP is listed at $1,672.04 AUD.
What is a high-flow cat and what does it change?
A catalytic converter cleans up exhaust gas; a high-flow version uses a less restrictive core than a stock converter while still doing the cleaning job. On a forced-induction V8 the converters and the pipe between them are a common flow restriction, so a high-flow cat set is the part owners reach for when they want less back-pressure than stock without deleting emissions hardware. It is a flow and packaging change; we hold no dyno data for this part, so we make no power claim.
Will it suit my Ford Falcon or FPV?
It is listed to fit the supercharged 5.0L V8 Falcon and FPV. Because supercharged Falcon and FPV builds vary, confirm your exact model and the manifolds you are running with the workshop before ordering — feed data can be imperfect and the part keys off the factory manifold flanges.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits and supplies this set in-house across the Illawarra. We confirm the converter and pipe match your factory manifolds, check clearances under the car, and seal the joints to the existing system. Send your build details and we will verify the fit before booking the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the SSMKFD0268 keep the catalytic converters?
- Yes. It uses high-flow catalytic converters rather than deleting them, so the emissions hardware stays in the system.
- Is this a complete exhaust system?
- No. The SSMKFD0268 is the high-flow cat and connecting-pipe section that joins to the factory manifolds — not a full cat-back or header set.
- Will it fit any Falcon?
- It is listed for the supercharged 5.0L V8 Falcon and FPV. Confirm your exact model and manifolds with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View part
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7030.42Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.