Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7707.93Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partSSMKFD0310
Mustang FM 5.0L V8 2015-2017 3in Full System, HPC Extractor, Centre Hotdog & Rear
MPI Automotive Mustang FM 5.0L V8 2015-2017 3in Full System, HPC Extractor, Centre Hotdog & Rear Mufflers, 4in Tips.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $6755.13 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKFD0310
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Ford
- Stock status
- In stock at supplier
Coated in HPC ceramic from the start, the MPI Automotive SSMKFD0310 puts a thermal-barrier extractor at the front of a 3in full system for the 2015–2017 FM Mustang 5.0L V8. The coating holds heat in the pipe and resists bluing; the system finishes through 4in tips.
What the HPC ceramic coating brings
The SSMKFD0310's lead trait is its HPC ceramic-coated extractor. The coating works as a thermal barrier, keeping exhaust heat inside the tube to help lower underbonnet temperatures and steady the intake-air picture, while the durable silver finish resists the corrosion and bluing that a bare header takes on. It's the done-once path versus buying a raw extractor and wrapping or coating it down the track.
What's in the full system for the FM Mustang?
This is a complete 3in run for the 2015–2017 FM: the HPC-coated extractor up front, a centre hotdog resonator, rear mufflers and 4in tips at the back. The factory manifolds and exhaust come out and the SSMKFD0310 goes in as one matched package, sized for the FM 5.0L V8. The hotdog and rear mufflers handle the silencing together so the note is shaped rather than left raw.
What's an extractor and what's the trade-off?
Extractors are tuned-length headers replacing the restrictive cast manifolds the Coyote V8 wore from the factory, giving each cylinder its own primary tube before the merge to cut back-pressure and aid scavenging. The usual trade-offs apply even coated: headers sit in the engine-bay heat zone, take labour to fit, and change the note — the ceramic coating is what addresses the heat and corrosion side a bare set leaves open.
Will it suit my FM Mustang, and what's the fitting?
It's listed to fit the 2015–2017 FM Mustang 5.0L V8; send your build and Oak Flats Muffler Men will confirm it before ordering. Fitting at our Illawarra workshop means removing the factory manifolds and exhaust, hanging the coated extractor, then routing the 3in system through the centre hotdog, rear mufflers and out to the 4in tips with clearance checks underneath. At an RRP of $6,755.13 it's a special-order set, so we confirm fitment and lead time first.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Why does the SSMKFD0310 come ceramic-coated?
- The HPC ceramic coating is a thermal barrier that keeps heat in the pipe, helps lower underbonnet temperatures, resists bluing and corrosion, and gives a durable silver finish — supplied done rather than as a raw header to coat yourself.
- What does the system finish in?
- It finishes through 4in tips, with a centre hotdog and rear mufflers ahead of them on the 3in run.
- Will it fit my 2015–2017 FM Mustang?
- It's listed to fit the FM Mustang 5.0L V8 from 2015 to 2017. Confirm your exact build with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View part
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7030.42Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.