Which Swift does the EMG221 suit?

It's listed to fit the Suzuki Swift GTi SA413/SF413 with the G13B 1.3-litre DOHC. Confirm your model code with the workshop first.

Is this just the gasket?

Yes — it's the seal between the head and the extractor or manifold, not the extractor itself.

Can the workshop fit it?

Yes. Oak Flats Muffler Men fits Swift GTi gaskets and extractors in the Illawarra; contact us to book.

EMG221

Suzuki Swift GTI SA413 SF413 G13B DOHC 1.3L Extractor Gasket

Suzuki Swift GTI SA413 SF413 G13B DOHC 1.3L Extractor Gasket (EMG221) fits selected vehicle.

BrandMantaMPI Automotive

Category: Extractors and headers

RRP $39.78 AUD

In stock at supplier

Request fitted quote Call the workshop

Afterpay, Zip Pay & Zip Money available

Suzuki Swift GTI SA413 SF413 G13B DOHC 1.3L Extractor Gasket product image

Part specs

SKU: EMG221
Supplier: MPI Automotive
Category: Extractors and headers
Stock status: In stock at supplier

The MPI Automotive EMG221 is an extractor/manifold gasket listed to fit the Suzuki Swift GTi (SA413/SF413) with the G13B 1.3-litre DOHC engine. It's the head-to-extractor sealing gasket, not the header itself.

What does this gasket cover?

The EMG221 is the flat exhaust gasket for the G13B twin-cam 1.3-litre used in the Swift GTi. It seals the joint where the extractor or factory manifold meets the cylinder head, keeping exhaust gas in the runner instead of leaking at the flange. It is cut to the G13B port layout, which is why it is matched to the SA413 and SF413 Swift GTi rather than a generic Suzuki.

What is an extractor gasket and what does it do?

An extractor gasket is the replaceable seal between the cylinder head and the exhaust extractor or manifold. Each time the system is opened up — new extractors, a head off, or a leaking joint — the gasket is renewed rather than reused, because heat cycling sets and hardens the old material. A worn gasket ticks or hisses under throttle and can let fumes past, so it is a routine service item. On its own it doesn't change how the car runs; it makes sure the joint stays sealed.

Will it suit my Swift GTi?

The EMG221 is listed to fit the Suzuki Swift GTi SA413/SF413 with the G13B 1.3-litre DOHC. Other Swift engines of the era take different parts, so confirm your model code and engine with the workshop before ordering.

What does fitting involve at our Illawarra workshop?

Oak Flats Muffler Men fits Swift GTi extractors and gaskets in-house across the Illawarra. Renewing the gasket means cleaning the head and extractor faces, checking the flange sits flat, and tightening evenly so it seals without crushing. The EMG221 is supplied by MPI Automotive at an RRP of $39.78; contact us to confirm fitment and book the bay.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Which Swift does the EMG221 suit?: It's listed to fit the Suzuki Swift GTi SA413/SF413 with the G13B 1.3-litre DOHC. Confirm your model code with the workshop first.
Is this just the gasket?: Yes — it's the seal between the head and the extractor or manifold, not the extractor itself.
Can the workshop fit it?: Yes. Oak Flats Muffler Men fits Swift GTi gaskets and extractors in the Illawarra; contact us to book.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section

Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.

Unit 2/8 Shaban St, Albion Park Rail NSW 2527 02 4256 3740 sales@mufflermen.com.au Send vehicle details