EVC601L

Ultimate9 Throttle Controller for Mazda 6 (01/2002 - on), MX-5

Ultimate9 Throttle Controller.

BrandUltimate9SWD

Category: Performance chips and ECU remaps

RRP $299.00 AUD
Order in
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
Ultimate9 Throttle Controller for Mazda 6 (01/2002 - on), MX-5 (01/200 product image

Part specs

SKU
EVC601L
Supplier
SWD
Category
Performance chips and ECU remaps
Stock status
Order in

Built for Mazda's drive-by-wire pedal, the Ultimate9 EVC601L throttle controller is listed to fit the Mazda 6 from 01/2002 and the MX-5. It's a plug-in module that reprofiles the accelerator signal so the throttle responds more directly to pedal movement.

Why fit a throttle controller to a Mazda?

Many drive-by-wire Mazdas use a soft, progressive pedal map that can feel slow to wake up off idle. The EVC601L addresses that by intercepting the accelerator pedal signal and re-mapping it before it reaches the ECU, so a given amount of pedal travel asks for more throttle opening, sooner. The result is a sharper, more connected feel through the pedal. On a light, responsive car like the MX-5 that change in pedal character is exactly what owners are usually after. Importantly, it doesn't alter the engine tune, fuelling or any output — it only changes the pedal-to-throttle response.

Mazda 6 and MX-5 fitment

The EVC601L is the Ultimate9 EVC variant listed to fit the Mazda 6 from 01/2002 onward and the MX-5, using the model-specific pedal plug. Fitment hinges on your exact pedal connector and build year, so send us your details and we'll confirm the EVC601L is the correct part number before you commit. As with all plug-in pedal modules, it's listed to fit rather than guaranteed across every variant.

What it does and doesn't do

This is a pedal-response controller, not a remap or a power chip. It changes how quickly the electronic throttle reacts to your foot — nothing more. We don't quote power, torque or economy figures for it because none are published; describing it as a response upgrade is the honest framing. Its modes can be adjusted up for a sharper feel or wound back toward standard whenever you prefer.

Fitting it at Oak Flats

Oak Flats Muffler Men installs the EVC601L at our Illawarra workshop. It connects at the accelerator pedal with the supplied plug-in harness and a small controller, with no need to cut into the factory wiring. We'll fit it, confirm the response modes operate across the full pedal range, and show you how to switch between settings before you head off.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Is the EVC601L a tune or a remap?
No. It's a throttle controller that re-maps the accelerator pedal signal for sharper response. It doesn't change the engine's tune, fuelling or boost.
Does it fit the Mazda MX-5?
It's listed to fit the MX-5 and the Mazda 6 from 01/2002 via the EVC's vehicle-specific plug. Confirm your exact model and year with the workshop first.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.