Mazda BT-50 2.5L & 3.0L (WEAT) TD 2006 to 2011 - Single 3" Kit with Cat
PacemakerRRP$2004.98Mazda BT-50 2.5L & 3.0L (WEAT) TD 2006 to 2011 - Single 3" Kit with Cat and Muffler (SKU: KB8000-XCMX), $2004.98 from Pacemaker.
View partKB8010-XCMX
Mazda BT-50 3.2L (P5AT) TD 2011 to 2016 - Single 3" Kit with Cat and Centre Muffler
Mazda BT-50 3.2L (P5AT) TD 2011 to 2016 - Single 3" Kit with Cat and Centre Muffler.
BrandPacemaker
Category: Mufflers and resonators
RRP $1758.60 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- KB8010-XCMX
- Supplier
- Pacemaker
- Category
- Mufflers and resonators
- Vehicle fitment
- Mazda UP
- Stock status
- Confirmed on order
The Pacemaker KB8010-XCMX is a single 3in exhaust kit listed to fit the Mazda BT-50 3.2L P5AT turbo-diesel (2011–2016), supplied with a catalytic converter and a centre muffler. Keeping the cat is the defining choice — this is the road-minded build for the later 3.2L BT-50.
Why does keeping the cat matter on the 3.2L?
This kit includes a catalytic converter, so the emissions equipment the 3.2L BT-50 needs for road compliance stays in place. On diesel utes that's the line between a road-minded system and an off-road one. The KB8010-XCMX pairs that cat with a centre muffler, which does the quietening through the middle of the run rather than only at the back. Confirm your state's requirements with the workshop before fitting.
What does the 3in P5AT kit cover?
At a 3in bore, this kit is sized up from a tighter stock system for the 3.2L P5AT turbo-diesel of 2011–2016. As a single 3in kit it runs one larger pipe through the cat and centre muffler — a complete section rather than a single replacement part. The 3in figure is the hard number; material isn't published, so we won't claim stainless or aluminised.
Will it suit my BT-50?
It's listed to fit the Mazda BT-50 3.2L P5AT turbo-diesel built 2011–2016. Confirm your exact ute, its engine and current exhaust with the workshop before ordering so the 3in kit, cat and centre muffler line up with the factory hardware.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits the KB8010-XCMX in-house across the Illawarra. We check the 3in routing under the BT-50, confirm the cat and centre-muffler positions and clearance, and fit the kit as a complete section. Send your build and we'll confirm and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the KB8010-XCMX include a catalytic converter?
- Yes — this is the with-cat kit, so the converter is included for the 3.2L BT-50.
- Where is the muffler?
- It runs a centre muffler, doing the quietening through the middle of the system rather than only at the rear.
- Will it fit my 3.2L BT-50?
- It's listed to fit the BT-50 3.2L P5AT turbo-diesel (2011–2016). Confirm your exact ute with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More mufflers and resonators the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mazda BT-50 2.5L & 3.0L (WEAT) TD 2006 to 2011 - Single 3" Kit
PacemakerRRP$1716.90Mazda BT-50 2.5L & 3.0L (WEAT) TD 2006 to 2011 - Single 3" Kit with a Muffler.
View part
Mazda BT-50 3.2L (P5AT) TD 2011 to 2016 - Single 3" Kit with Centre
PacemakerRRP$1465.87Mazda BT-50 3.2L (P5AT) TD 2011 to 2016 - Single 3" Kit with Centre Muffler (SKU: KB8010-XXMX), $1465.87 from Pacemaker.
View part
Mazda BT50 2020 ON 3.0L TURBO BACK WITH CAT & MUFFLER
MPI AutomotiveRRP$2891.99Mazda BT50 2020 ON 3.0L TURBO BACK WITH CAT & MUFFLER.
View part
Mazda BT50 2020 ON 3.0L TURBO BACK WITH CAT & HOTDOG
MPI AutomotiveRRP$2851.56Mazda BT50 2020 ON 3.0L TURBO BACK WITH CAT & HOTDOG (SSMKMA0014) Fits MAZDA. Fast shipping, warranty included.
View part
Mazda BT50 2020 ON 3.0L TURBO BACK WITH CAT & WITHOUT MUFFLER
MPI AutomotiveRRP$2747.95Mazda BT50 2020 ON 3.0L TURBO BACK WITH CAT & WITHOUT MUFFLER.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.